Wi-Fi Hack [WEP only]

I post this for education purpose. Please don't misuse it.

There are many software's out there to hack wi-fi.
I'm using a linux based software which is known as Beini ~

This software is easy and not complicated to use.

What u need to hack wi-fi :-

1. External USB wi-fi. [It only cost RM20 - 30]

2. Make sure the wi-fi driver is installed on pc/laptop.

Download VMware : http://www.mediafire.com/?k2ux9ctcn0o099v
Download Beini 1.2.1 : http://www.mediafire.com/?tf4lqqb2825przp

First download the file from this link and extract the files.

[I recommend one to extract the files on Desktop]

 1. Install the VMware Player. [Just go next and next.]
 2. Run the VMware Player and Create a new virtual Machine as show

Create a New virtual Machine 

 3. Click the I will install operating system later.

Click the image to enlarge 

 4. Use the setting as shown on the picture below

Click the image to enlarge

 5. Rename the Virtual Machine Name to Beini  [DO NOT CHANGE THE LOCATION]

 6. Store the virtual disk as a single file. [MAXIMUM SIZE CAN BE LESSER/MORE THAN 8GB]

 7. Don't click Finish it, click the Customize Hardware 

Click the image to enlarge

 8. Use the recommended memory. This is a Linux based software, so it wont use big memory.

 9. Click the New CD/DVD and click the radio button use ISO image file:

Click the image to enlarge

 10. Browse the ISO file which u downloaded and extracted and locate it.

 11. Click the Floppy and click the remove button because we are not using Floppy.

Click the image to enlarge

 12. After removing the floppy disk, click the USB controller and make sure every radio button is ticked and click OK.

Click the image to enlarge

 13. Click finish and click the Play Virtual Machine.

Click the image to enlarge

 14. Wait for a few second to load. It might take few seconds to open the Virtual Machine. Scroll down as shown. [Depends on one's RAM]

Click the image to enlarge 

 15.  After you scrolled down, connect your external Wi-Fi into your PC/laptop. [Make sure the driver is installed].

 16. Wait for a second, then open your Virtual Machine and right click on the external Wi-Fi USB adapter as shown on the picture and click on connect (Disconnect from Internet)

Click image to enlarge

 17. Once its connected the color of USB which connected will change to dark blue.

Click the image to enlarge

 18. Once its connected, click the minidwep-gtk-20510 and a warning will pop out. Click OK on the warning.

Click the image to enlarge

 19. A Graphical User Interface (GUI) will pop out, and click the scan button.

Click the image to enlarge

 20. It Will take few moment depends on the strength of wi-fi. Once it finished scan, click the wi-fi that gonna hack and hit the lanch button. A command box will pop out and it started to run. It will take few moments, some might take 30 minutes depends on the strength of the wi-fi.

Click the image to enlarge

 21. Once its done, a box will pop out and the password will be on the box. The password will be in the ASCII key. If the password is in HEX key, convert it to ASCII.

Click the image to enlarge

 These are full steps to crack a WEP key WI-FI by using Beini. Use it with own risk. If there is any problem, feel free to comment below.